STRUCTURE & SITE

Flex Sprinkler.

Connect pendent or upright sprinklers to a Pipe with a rigid branch plus flex drop, choosing one of four Type1–Type4 layouts.

01 · THE PROBLEM

Hanging sprinklers on a pipe network is still done one head at a time: pick pendent or upright, draw the rigid branch then the flex drop, and repeat across the floor — layouts drift and heads get missed.

4 kiểu nối

Type1–Type4 layouts are remembered and drawn by hand

The four rigid-branch plus flex-drop layouts (Type1–Type4) differ in direction and takeoff — drawing each sprinkler by hand lets the layout drift across heads on the same run.

Pendent / Upright

Pendent and upright do not share one connect action

Pendent heads hang below the pipe, upright heads sit above it — same network, opposite drop direction, so the modeler swaps families and elevations one by one.

Cả tầng

No batch connect — every head is another click round

A fire-protection floor can carry dozens to hundreds of sprinklers; without batch connect, every head is another round of picking pipe, drawing the branch, then the flex.

02 · FEATURES

What it does

Flex Sprinkler packs four connection types, pendent versus upright, and batch-connects the selected heads:

Connect sprinklers

Four Type1–Type4 layouts: rigid branch plus flex drop
Handles pendent and upright sprinklers
Batch-connects selected heads to a Pipe

TOOL INTERFACE · RUNNING IN REVIT

Operational interface and functional overview

The interface is matched to the tool window running in Revit.